Inner corner profile FL-210

The internal corner profile covers the vertical internal edge where two wall surfaces meet. It connects the adjacent elements and ensures a neat, seamless finish at the corner. It is therefore the counterpart to the external corner profile for inward-facing wall corners.

• Connection of wall and ceiling elements with and to one another in interior areas such as halls, cold stores...
• Internal cladding of vertical corner walls

Material: 0.75 mm galvanised sheet steel, 25 µm PE-coated

The internal corner profile is used wherever two wall surfaces form an inwards-facing corner. Typical applications include:

• internal cladding of vertical corner walls
• Joining wall and ceiling elements indoors
• Internal corners of halls, commercial and warehouse buildings
• Internal corners of cold stores and temperature-controlled buildings

The profile is made of 0.75 mm thick galvanised sheet steel with a 25 µm PE coating and is available in the colours RAL 7016, 8012, 9002, 9006 and 9007. This allows it to be selected to match the colour of the wall panels.

The internal corner profile is the right choice for wall corners facing inwards. For an outward-facing corner, on the other hand, the external corner profile is intended. When it comes to the lower wall finish or covering cut-outs, the U-profile is the right component. You can find an overview of all profiles in the ‘Edge Profiles’ category.

The internal corner profile is installed together with wall panels. Suitable products include:

• Wall panels in the desired thickness, such as the 40mm wall panel or the 60mm wall panel. You can find the full range under ‘Sandwich Panels – Walls’.
• Screws for fixing the edge profiles, such as the 7550 screw, which is specifically designed for edge profiles.
• The matching counterpart for external corners: the external corner profile.

You can find an overview of all accessories in our Accessories section.

What is the difference between internal and external corner profiles?

The internal corner profile covers an inward-facing wall corner, whilst the external corner profile covers an outward-facing one. Both are used on most buildings, depending on the position of the corner.

In what lengths and colours is the profile available?

The profile is available in lengths of 0.5, 1, 1.5, 2 and 2.5 metres, as well as in the colours RAL 7016, 8012, 9002, 9006 and 9007. We manufacture lengths of 2.5 metres or more on request.

Is the profile also suitable for cold rooms?

Yes. The internal corner profile is also used in the interior fit-out of cold stores to neatly join and cover wall and ceiling elements at the internal corners.

What screws do I need for fixing?

Screw 7550 is suitable for fixing edge profiles. The correct choice depends on the substrate; we’d be happy to advise you on this.